that no power is being supplied to a cable to be connected. - As a safety measure, always install a circuit breaker (an IEC 60947, compatible product, 5 A, 100 V or 220 V AC) in an easily accessible, location near the instrument. The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. and workmanship for 18 months from the date of manufacturing. 2.The cable length must not exceed 1.5 km at 9600 baud. Yokogawa TC10-L Limit Controller Starting at $329.00 Select Options and Add to Cart View Company Reviews Manufactured By Yokogawa Includes FREE Ground Shipping on orders of $1,000 or more FREE Lifetime Tech Support Availability Some models in stock. 2.It is possible to set a initial scale read-out higher than the full scale read-out in order to obtain a reverse read-out scaling. Current availability for non-stock parts is "Usually ships in 7-10 business days". Burn out: full scale Calibration:According to EN 60584-1. - Do not short-circuit the terminals of the SSR output. In other words the upper display will show: ]INP. The UT52A/MDL supports 920 MHz band wireless communication. facilities, aviation facilities, and medical equipment. 3. , we recommend to congure the parameters to. All information about. Model TC10 Temperature Controller, Quick Guide, Model TC10 Temperature Controller, Engineering Manual, Model TC10 Temperature Controller, Serial communication protocol Modbus for TC10, New Legislative Framework (NLF) Conforming Products, List of RoHS (2011/65/EU) Directive Compliant Products (6-substances RoHS compliant products), Replacement Guide for TC10 Temperature Controller, The EU Declaration of Conformity TC10 *Log-in Required, Temperature Controllers 2D CAD *Log-in Required, Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), IP65 front panel (when the optional panel gasket is mounted)(optional). The equipment wholly protected by double insulation or, - Whenever a failure or a malfunction of the device may cause dan-, gerous situations for persons, things or animals, please remember, that the plant must be equipped with additional devices which, - We warrant that the products will be free from defects in material. Do not run logic input wiring together with power cables; The instrument needs 150 ms to recognize a contact status variation; To avoid electrical shocks, connect power line at last. 4.Pay attention to the line resistance; a high line resistance may cause measurement errors. Products and components that are subject to wear due to conditions. Also, YOKOGAWA Electric Corporation assumes no liability for the customer's, failure to comply with these requirements. user must refer to the Engineering manual for special instructions. 2.2.2TD Pt 100 Input 1R Other part numbers are available to order but are not currently in stock. The upper display will show PASS while the lower display will show 0. The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. When a shielded cable is used, it should be connected at one point only. displayed value becomes 999.9C or 999.9F. The UT35A and UT32A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. All information about. Download digitalview ALR-1400 Instructions manual . It also includes a ladder sequence function. There is minimum vibrations and no impact; 4. Type: Instructions manual . IP65 rated as "dust tight" and protected against water projected from a nozzle when the optional panel gasket is mounted (for indoor locations) according to EN 60070-1. The UT32A/MDL supports 920 MHz band wireless communication. Such, applications include nuclear power equipment, devices using, radioactivity, railway facilities, aviation equipment, air navigation. use only, in an electrical panel which encloses the rear housing. Yes, if the input type is voltage or current. Use a tester or similar device to ensure. "), 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750 Japan www.yokogawa.com/ns. YOKOGAWA Manuals and User Guides All-Guides Database contains 857 YOKOGAWA Manuals (1264 Devices) for Free Downloading (PDF). the protection provided by this instrument may be impaired. OUTLINE DIMENSIONS (mm) 1.1 INSTRUMENT DIMENSIONS 1.2 PANEL CUT-OUT 65 mm min. Yokogawa Electric Corporation - TC10 - ENGINEERING MANUAL - PAG. However, the instrument will only show the parameters applicable to its hardware options in accordance with the specic instrument conguration (i.e. YOKOGAWA TC10-L Quick Manual; YOKOGAWA TC10-L Quick Manual. SSR outputs are not isolated. SSR outputs are not isolated. There are no water or other fluids (i.e. and workmanship for 18 months from the date of manufacturing. Search the full list . Wattmeter power consumption is the estimated hourly, energy consumption (using Load Voltage and Load Current, parameter values), computed on the previous 15 minutes. It has been designed with compliance to the European Directives. Range: When the code of the input type is equal to c (see paragraph How to order). facilities, aviation facilities, and medical equipment. The UT32A-D is a compact digital indicating controller with selectable 2-loop control. The default data are those typical values loaded in the instrument prior to ship it from factory. The ambient temperature is in accordance with the, 6. The cable length must not exceed 1.5 km at 9600 baud. Yokogawa TC10 Temperature Controller Starting at $203.00 Select Options and Add to Cart View Company Reviews Manufactured By Yokogawa Includes FREE Ground Shipping on orders of $1,000 or more FREE Lifetime Tech Support Availability Usually ships in 2-3 weeks Product Manual Product Specs Overview Description Documents Accessories Features The TC10 supports easy configuration with codes for quick start-up. Wattmeter power consumption is the estimated hourly, energy consumption (using Load Voltage and Load Current, parameter values), computed on the previous 15 minutes. The TC10 supports easy configuration with codes for quick start-up. If this instrument is used in a manner not specified in this manual. The UT32A-V,-C,-R is an easily configurable single-loop controller for 1/8 DIN sized. Select a mounting location having the following characteristics: 2. Case: Plastic, self-extinguishing degree: V-0 according to UL 94; Front protection: IP 65 (when the optional panel gasket is mounted) for indoor locations according to EN 60070-1; Terminals protection: IP 20 according to EN 60070-1; Terminal block: 16 screw terminals for cables of. The shallow depth of the controller helps to save instrument panel space. High Quality SDA25x30 Pneumatic SDA25-30mm Double Acting Compact AIR Cylinder. switch is a device for turning off the power to the instrument. values and the controller output instantaneous value. 2 Cold junction accuracy:0.05C/C after a warm-up of 20 minutes. the protection provided by this instrument may be impaired. A reinforced isolation must be assured by the external solid state relays. I selected SP value transmission on TC10, but no SP value is displayed. Digital indicating controllers (476 pages), Program temperature controller (37 pages), Temperature measurement module (44 pages), Manual will be automatically added to "My Manuals", Temperature Controller YOKOGAWA TC10 Engineering Manual, Temperature Controller Yokogawa TC10 Quick Manual, Temperature Controller YOKOGAWA TC User Manual, Temperature Controller YOKOGAWA UT55A User Manual, Temperature Controller YOKOGAWA UP150 User Manual, Temperature Controller YOKOGAWA XS550 User Manual, Temperature Controller YOKOGAWA UT130 Technical Information, Temperature Controller YOKOGAWA UT150 User Manual, Temperature Controller YOKOGAWA UT100 Series User Manual. Internal auxiliary PWS: 12 VDC (10%), 20 mA max.. 0/4 to 20 mA input wiring for passive transmitter using an external pws, 0/4 to 20 mA input wiring for active transmitter. switch is a device for turning off the power to the instrument. We assume no liability for safety, or responsibility for, the product's quality, performance or functionality should users. Can't find your region? Products and components that are subject to wear due to conditions. Yokogawa Electric Corporation - TC10 - ENGINEERING MANUAL - PAG. Notes: 1. A ladder sequence function is included as standard. Can it output the SP setting value? Use of the, instrument in a manner not prescribed herein may compromise, the product's functions and the protection features inherent in, the device. 1 to 4 indicate the status of outputs 1 to 4. Model: TC10-L Quick Guide . A long press allows you to close the conguration parameter procedure (the instrument will come back to the standard display). Input circuit: Current injection (135 A). Can't find your region? the protection provided by this instrument may be impaired. : 500W. The. IP65 Certification when the optional panel gasket is mounted. 5.3 HOW TO ENTER THE CONFIGURATION MODES. Yokogawa TC10-L Manual Download for 1 TCTC10- L LIMIT CONTROL TYPE Engineering Manual Code: IM 05C01E81-12EN First edition: Nov. 2019 Yokogawa Electric Corporation 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750 Japan www.yokogawa.com/ns 1. fail to observe these instructions when operating the product. [13] AL1 and [30] AL2 will be forced to : for an absolute maximum alarm, them will be forced to the maximum input span, for an absolute minimum alarm, them will be forced to the minimum input span, for all other alarm, them will be forced to zero, [14] HAL1 and [31] HAL2 will be forced equal to the 0.5% of the input span, [35] HYS will be forced equal to 0.05 % of the input span, the CAL group will be reset [51]A.L.P, [52] A.L.O, [53] A.H.P, [54] A.H.O. 1.Push the button for more than 3 seconds. Do I need a minus sign ( - ) on the alarm setting value? 6. The relative humidity is in accordance with the instrument, The instrument can be mounted on panel with a maximum, When the maximum front protection (IP65) is desired, the optional, - Digital Input (DI2) connecting a free of. If the other instruments have an SG terminal, how should I wire it? Notes: 1. View and Download Yokogawa UT55A instruction manual online. Cold junction accuracy: 0.04C/C after a warm-up of 20 minutes. codes: Cod1 [LMNO] for the Input Type and Control Mode selection and Cod2 [PQRS] for the Alarms and the Service Functions. At this point the instrument restarts as for a new power ON. The TC10-L features universal input, 3 Dynamic Colors Led Display two alarm outputs, retransmission output, a timer to count the total time the setpoint is exceeded, and a register to retain the maximum temperature reached. The UT55A/UT52A also support open networks such as Ethernet communication. A ladder sequence function is included as standard. The following general safety precautions must be observed during. Input impedance: > 1 MW for mV Input 500 kW for Volt Input. Yes, if the input type is voltage or current. I selected SP value transmission on TC10, but no SP value is displayed. Select a mounting location having the following characteristics: 2. voltage contact between terminals 4 and 16; - 0 to 12 V SSR Drive Output (OP4) connecting, - 12 Vdc (20 mA) transmitter power supply, connecting the 2 wire transmitter between, terminals 4 and 1; for 3 wire transmitter connect, terminal 4 to transmitter power supply input and. Can I turn off the "C" display with input other than temperature on TC10? For supply connections use No. - This product is intended to be handled by skilled/trained person-, - This instrument is for Measurement Category No. Enter your email address and check your inbox. [34] r.md equal to 1(Limit output is de-energized at power on in any cases. The SP value is not displayed if you dont specify a control operation. Use a tester or similar device to ensure. requirements of the area in which the instrument is being installed. Third edition: Feb. 2018. . On burnout, it will be 0 mA. use only, in an electrical panel which encloses the rear housing. Can I turn off the "C" display with input other than temperature on TC10? Yokogawa Electric Corporation - TC10-L - ENGINEERING MANUAL - PAG. Allows to decrease the value of the selected parameter. that no power is being supplied to a cable to be connected. of use, service life and misuse are not covered by this warranty. 2.56 in min. desired, the optional gasket must be mounted. Do not use it, for measurements in locations falling under Measurement Catego-, For measurements performed on circuits not directly, For measurements performed on circuits directly. Looking for more information on our people, technology and solutions? SKU:WE4537266 I'm looking for a replacement for the UD310. Only wire the other instruments SG terminal. The short depth of the controller helps save instrument panel space. connected between sensor and input terminals may cause errors in measurement due to excessive and/or not balanced line resistance or possible leakage currents. Note: For TC wiring use proper compensating cable preferable shielded. Pages: 30 . Also, YOKOGAWA Electric Corporation assumes no liability for the customer's, failure to comply with these requirements. - This product is intended to be handled by skilled/trained person-, - This instrument is for Measurement Category No. There is minimum vibrations and no impact; 4. 1. requirements of the area in which the instrument is being installed. 2.External components (like zener barriers, etc.) TC10-L is a panel mounting, Class II instrument. Looking for more information on our people, technology and solutions? 2. What settings should I use to output PV transmission from ananalog output terminal on TC10? What is the I/O response time of the TC10? Limit control type. On burnout, it will be 0 mA. The following symbol is, This manual is an essential part of the product; keep it in a safe place for. Note: This filter will affect the measured value but also the control action the analogue retransmission and the alarms, Overall dimensions (L x H x D): 48 x 48 x 73 mm, This instrument is intended for permanent installation, for indoor. terminal 1 and 2 to transmitter signal output. At this point the instrument restarts as for a new power ON. 2. OUTLINE DIMENSIONS (mm) 1.1 INSTRUMENT DIMENSIONS 48 PV Optional gasket 1.2 PANEL CUT-OUT 45 +0.6 mm 1.78 +0.023 Such, applications include nuclear power equipment, devices using, radioactivity, railway facilities, aviation equipment, air navigation. For complete controller configuration see the Engineering Manual. Current availability for non-stock parts is "Usually ships in 7-10 business days". 5, the lower display is showing its value, this key allows, to store the selected value for the current parameter. At this point you can set the operator. 5.6 FACTORY RESET - DEFAULT PARAMETERS LOADING PROCEDURE. Safety, Protection, and Modification of the Product, - In order to protect the system controlled by this product and the, product itself, and to ensure safe operation, observe the safety, precautions described in the Engineering manual. Safety, Protection, and Modification of the Product, - In order to protect the system controlled by this product and the, product itself, and to ensure safe operation, observe the safety, precautions described in the Engineering manual. With thermocouple K input, can I display digits after the decimal point for the temperature? CONTROLLER Engineering Manual. : set points, proportional band, etc.). equipment and devices that ensure personnel safety. countries or regions where wiring will be installed. The output (OUT) display lamp is lit. The following, Calls attention to actions or conditions that could cause serious or, fatal injury to the user or damage to the instrument, and indicates, precautions that should be taken to prevent such occurrences. The polarity of the power supply has no importance; The power supply input is NOT fuse protected. The instrument will show a measured value up to 5% less than SSc value and then it will show an underrange error. For SSR, mA and V outputs if the line length is longer than 30 m use a shielded wire. : control, alarms, output functions). Download Manual of YOKOGAWA TC 10-L Controller for Free or View it Online on All-Guides.com. values and the controller output instantaneous value. What settings should I use to output PV transmission from ananalog output terminal on TC10? Code: IM 05C01E81-02EN. There are no water or other fluids (i.e. If the password is correct the display will show the acronym of the rst parameter group preceded by the symbol: ]. countries or regions where wiring will be installed. IM 05C01E81-01EN, 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750 Japan, Declaration of conformity and Manual retrieval, TC10 is a panel mounting, Class II instrument. The upper display will show PASS while the lower display shows 0; 2.Using and buttons set the value -481; 4.The instrument will turn OFF all LEDs for a few seconds, then the upper display will show dFLt (default) and then all LEDs are turned ON for 2 seconds. IM 05C01E81-01EN 1 Edition Oct. 2014 st Yokogawa Electric Corporation 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750 Japan internet site: www.yokogawa.com/ns Declaration of conformity and Manual retrieval TC10 is a panel mounting, Class II instrument. AL on the front of the TC10 is the alarm lamp. 600W. Pay attention to the line resistance; a high line resistance may cause measurement errors. Compliance: directive EMC 2004/108/CE (EN 61326-1), directive LV 2006/95/CE (EN 61010-1). Moreover, provide indication that the. Looking for more information on our people, technology and solutions? The shallow depth of the controller helps to save instrument panel space. This manual is intended for the following personnel: - Engineers responsible for installation, wiring, and maintenance of, - Personnel responsible for normal daily operation of the equip-, Calls attention to actions or conditions that could cause serious or, fatal injury to the user or damage to the instrument, and indicates, precautions that should be taken to prevent such occurrences. This is a list of recorder and controller products that support the New Legislative Framework (NLF.). - Installation of protection and/or safety circuits with respect to a, lightning protector; protective equipment for the system controlled, by the product and the product itself; foolproof or failsafe design, of a process or line using the system controlled by the product or, the product itself; and/or the design and installation of other, protective and safety circuits are to be appropriately implemented, - This product is not designed or manufactured to be used in critical, applications that directly affect or threaten human lives. 0.25 to 2.5 mm2 (AWG22 to AWG14) with connection diagram, tightening torque 0.5 Nm; Dimensions: 48 x 48, depth 73 mm, (1.89 x 1.89 x 2.87 in. Every change of the SEnS parameter will produces a change of the related parameter and in particular: [11] Ao1L and [12] Ao1H (when the analog retransmission is present) will be forced to the Ex.Range limits. If thePV does not exceed SP, after the conrming operation, output relay will be energized (closed) and the output (OUT) display lamp turns off . It has been designed, with compliance to the European Directives. Can I output in the 100% direction (20 mA or more) upon burnout? user must refer to the Engineering manual for special instructions. The readout is updated every 15 minutes. The TC10 is a compact temperature single loop controller with easy -to-read 3 dynamic colors led display. The TC series of temperature controllers is perfect for controlling the heating temperature of sealing parts and the temperature of sealing rolls (pre-heating) in a variety of different wrapping machinery.
How To Leave An Edpuzzle Class As A Student,
An Estimate Of Remaining Economic Life Is Required By,
Netgear Cm700 Ethernet Light Blinking,
Faa Airman Drug And Alcohol Personal Statement,
How To Treat Bed Sores On Buttocks At Home,
Articles Y
